FLOAT DOCK STRAINER®

"The Original" Float Dock® strainer is a valuable piece of equipment that can save the day in many water supply situations. Float Dock® lets you use the water in farm ponds or streams, both shallow and deep, and with Type-A tanks. Because it operates below scum, debris, sand and muck, it screens out the materials that wear out impellers, packing and bearings. Since Float Dock strainers are self-leveling, there are no whirlpools or suction loss. Each unit is fully guaranteed. Float Dock® strainers draft in a s little as 5"/13 cm of water at pump's rated capacity.

FEATURES:

Professionally designed & engineered for maximum pumping capacity
Not hand welded
Al-Mag castings
Durable polyethylene float
Long handle swivels with standard NH or NPSH threads Other threads available
Detach strainer and use separately as a "Box Strainer"
Al-Mag castings - Proven to be the toughest in the industry!
All Float Dock® are available in all aluminum construction up to 8"
Float Dock® drafts in as little as 5 inches (13) cm of water

SIZES

Part No.	Size inches/cm	Float Only inches/cm	Strainer Only inches/cm	Weight lbs./kg
FDS-2.5	2-1/2"/6cm	5"x15"x18"/13x38x47	4"x6"x14"/10x15x36	16/7
FDS-3.0	3"/8cm	5"x15"x18"/13x38x47	4"x6"x14"/10x15x36	16/7
FDS-4.0	4"/10cm	7"x21"x26"/18x55x67	7"x8"x15"/15x20x38	31/14
FDS-4.5	4-1/2"/11cm	7"x21"x26"/18x55x67	7"x8"x15"/15x20x38	32/15
FDS-5.0	5"/13cm	7"x21"x26"/18x55x67	7"x8"x15"/15x20x38	32/15
FDS-6.0	6"/15cm	7"x21"x26"/18x55x67	7"x8"x15"/15x20x38	33/15

ACCESSORIES FOR FLOAT DOCK® STRAINER

Carry Rack for Float Dock® strainer

Lightweight carrying rack can be mounted on a running board or inside a compartment. There are two sizes. Small is for 2-1/2" and 3"
Float Dock® strainers. Large is for 4"-6" Float Dock® strainers.

Part No.
FDSCR-Small
FDSCR-Large

Riser for Float Dock® strainer

Sits on tank bottom without damage to liner. Made of lightweight aluminum.

Sizes 4"-6"

Part No.
FDSAR

BARREL STRAINER

This strainer is constructed from high tensil strength aluminum alloy and is designed to allow full pumping capacity. Attaches easily to any type of suction hose with standard NST female threads. Storz connection available. Sizes range from 1.5"-6"

Brass Foot Valve & Check Valve

2.5" Float Dock® Strainer shown with foot valve.

Construction Features:

Valve body and poppet assembly are cast brass.
O-Ring is fitted to the poppet for a water tight seal.
Corrosion resistant materials for long lasting use.
Can be used in both vertical and horizontal positions.
LEAD FREE - ENVIRONMENTALLY FRIENDLY

Brass Foot Valve

Size	Part No.	Weight	Enters Pipe	Length
1.5"	FDTFV-150	1.48 lbs	2 1/2"	6.37"
2.0"	FDTFV-200	2.70 lbs	3 1/2"	7.00"

2.5" Available

*Note for consumer -
All Fol-Da-Tank Foot Valves exceed U.S. federal safe water drinking act requirements.

Brass Check Valve

Size	Part No.	Weight	Enters Pipe	Length
1.5"	FDTCV-150	1.65 lbs	2.50"	4.25"
2.0"	FDTCV-200	2.89 lbs	3.12"	5.00"